Chapter 2 • The X-431 Scanner Printer Operation - Replacing Paper
©X-431 USA 2-7
3. Place the paper spindle into the printer with the ‘shiny’ side of the paper
facing up. The paper may not be fed correctly if the orientation in
incorrect.
4. Open the side plate, pull up the pressing road and lead the paper into the
slot. Turn the feed knob clockwise until the paper comes out of the
outlet.
5. Push down the pressing rod, mount the side plate, attach the paper lid
and re-attach the MiniPrinter to the X-431 Main unit.
To Next Page
Loading...