©X-431 USA 3-1
1 (877) GET-X431
3 • Registration
Your X-431 Scanner is ready to use right out of the box. The CF Card
included with your X-431was pre-loaded with the software available at the
time of production. Keep in mind that this software could be outdated by the
time the unit gets to you, so you should update your machine before using it.
The first step is to register your Smartbox at www.x431usa.com ->
Update/Register -> ‘Register a New Tool.’ Before doing
so, read the following section on technical requirements.
Technical Requirements
CF Card Reader - Operating System Requirements
The Compact Flash Card Reader can use the default drivers for Windows®
2000, Windows® ME, and Windows® XP, as well as for Mac OS® 9.x and
Mac OS X. Just plug it in to use it.
Windows 98 Users • If your PC is running Windows 98 then you will have
to install the CF Card Reader driver from the CD, which is included in the
documentation envelope. Do not connect the compact flash reader before
installing the driver.
To install the CF Card Reader driver for Windows 98, complete the
following steps:
1. Turn on your PC.
2. Insert the CD titled Flash Card Reader Drivers.
3. In the lower left-hand corner of your screen, click the Start button and
select Run.
To Next Page
Loading...