Smartgen HGM7100N Series User Manual

HGM7100N GENSET CONTROLLER USER MANUAL
HGM7100N Genset Controller 2020-09-10 Version1.2 Page 16 of 47
No.
Type
Description
17
Low Oil Pressure
Shutdown
When controller detects oil pressure is lower than the set value, it will
send stop signals.
18
Level Sensor Open
Circuit
When controller detects sensor is open circuit, and the action select
“shutdown”, it will send stop signals.
19
Low Level Shutdown
When controller detects liquid level is lower than the set value, it will
send stop signals.
20
Config. Sensor 1 Open
Circuit
When controller detects that sensor is open circuit, and action type is
select “Shutdown”, it will send stop signals.
21
Config. Sensor 1 High
When controller detects that the sensor value exceeds the pre-set
upper limit shutdown value, it will send stop signals.
22
Config. Sensor 1 Low
When controller detects that the sensor value falls below the pre-set
lower limit shutdown value, it will send stop signals.
23
Config. Sensor 2 Open
Circuit
When controller detects that sensor is open circuit, and action type is
select “Shutdown”, it will send stop signals.
24
Config. Sensor 2 High
When controller detects that the sensor value exceeds the pre-set
upper limit shutdown value, it will send stop signals.
25
Config. Sensor 2 Low
When controller detects that the sensor value falls below the pre-set
lower limit shutdown value, it will send stop signals.
26
Input Alarm Shutdown
When digital input port configured as “Shutdown”, and it is active,
controller will send stop signals.

Smartgen HGM7100N Series Specifications

General

Brand	Smartgen
Model	HGM7100N Series
Category	Controller
Language	English