Advanced Mode
Each function on the configuration list will be explained in the following sections. Those
functions that are displayed only in Advanced Mode are marked with
Advanced Mode
. If
you want to set up advanced functions, please click [Advanced Mode] on the bottom of the
conguration list to quickly switch over.
System
This section explains how to congure the basic settings for the Network Camera, such
as the host name and system time. It is composed of the following three columns:
System, System Time and DI and DO. When finished with the settings on this page,
click Save at the bottom of the page to enable the settings.
System
Host name: Enter a desired name for the Network Camera. The text will be displayed at the top
of the main page.
Turn o the LED indicators: If you do not want to let others know that the network camera is in
operation, you can select this option to turn o the LED indicators.
To Next Page
Loading...