smartvue S9C1 - Wireless LAN (S9 C1 Only)

To Next Page

To Previous Page

Wireless LAN (S9C1 only)

SSID (Service Set Identifier): This is the name that identifies a wireless network� Access Points and

wireless clients attempting to connect to a specic WLAN (Wireless Local Area Network) must use the

same SSID� The default setting is “default”� Note: The maximum length for an SSID is 32 single-byte

characters and cannot consist of “, <, >, or blank spaces�

Wireless mode: Click on the pull-down menu to select from the following options:

■

Infrastructure: Connect the Network Camera to the WLAN via an Access Point� (default setting)

■

Ad-Hoc: Connect the Network Camera directly to a host equipped with a wireless adapter in a peer-to-

peer environment�

Channel: While in infrastructure mode, the channel is selected automatically to match the channel setting

of the selected Access Point� In Ad-Hoc mode, the channel must be manually set to the same channel for

each wireless adapter� The default channel setting depends on the installed region�

Security: Select the data encrypt method� There are four types, including: none, WEP, WPA-PSK, and

WPA2-PSK�

1�

None: No data encryption�