smartvue S9C1 - Recording

96
Recording
Advanced Mode
This section explains how to congure the recording settings for the Network Camera.
Recording Settings
●
Before setting up this page, please set up the Network Storage on the Server Settings page
rst.
●
Please remember to format your SD card when using for the rst time. Please refer to page
100 for detailed information.
Network Storage Setting
Click Server to open the Server Settings page and follow the steps below to set up:
1. Fill in the information for your server.
For example:
2. Click Test to check the setting. The result will be shown in the pop-up window.
1
2
3
4
Network storage path
(\\server name or IP address\folder name)
User name and password for your server
TSB
abc
Insert your SD card and click here to test
NOTE