smartvue S9C1 - HTTPS (Hypertext Transfer Protocol over SSL)

To Next Page

To Previous Page

HTTPS (Hypertext Transfer Protocol over SSL)

Advanced Mode

This section explains how to enable authentication and encrypted communication

over SSL (Secure Socket Layer). It helps protect streaming data transmission over the

Internet on higher security level.

Enable HTTPS

Check this item to enable HTTPS communication, then select a connection option: "HTTP &

HTTPS" or "HTTPS only". Note that you have to create and install a certicate rst in the second

column before clicking the Save button.

Create and Install Certicate Method

Before using HTTPS for communication with the Network Camera, a Certicate must be created

rst. There are three ways to create and install a certicate:

Create self-signed certificate automatically

1. Select this option.

2. In the rst column, check Enable HTTPS secure connection, then select a connection option:

“HTTP & HTTPS” or “HTTPS only”.

3. Click Save to generate a certicate.