■ Camera tampering detection
This option allows the Network Camera to trigger when the camera detects that is being
tampered with. To enable this function, you need to configure the Tampering Detection
option rst.
Event Schedule
Specify the period for the event.
■ Select the days of the week.
■ Select the recording schedule in 24-hr time format.
Action
Dene the actions to be performed by the Network Camera when a trigger is activated.
■ Trigger digital output for
seconds
Select this option to turn on the external digital output device when a trigger is activated.
Specify the length of the trigger interval in the text box.
■ Move to preset location
Select this option, the Network Camera will move to the preset location when a trigger is
activated.
Please setup the preset locations rst. Please refer to Preset Positions on page 78 for detailed
To Next Page
Loading...