A: Solutions:
1 There is no other device exist in the local area network
2 The subnet mask setting incorrectly on Network settings.
26
Q: The snapshot at alarm function was enable, why not catch picture
A: Solutions:
1 HDD manage without partition for snapshot.
2 Partition for snapshot is 0.
3 The snapshot function is not enable on record -> storage of related channel.
27、 The time shows on digital channel is not the same as local side:
Enable the time synchronous function of digital channel.
28、 Can not see preview picture of analog channel
A:Solutions
:
1 The camera did not connect to video interface
2 The device did not connect to video source
3 Video source is broken.
29、Picture will be frozen when multi-connection and shift devices.
Picture come out from digital channel need few seconds, shift device means to show new picture,
so it needs several seconds to buffer.
Page 72
To Next Page
Loading...
Need help?
General
