C
ONFIGURING
C
LIENT
TCP/IP
5-17
2. In the "Command Prompt" window, type "IPCONFIG /
RELEASE" and press the <ENTER> key.
3. Type "IPCONFIG /RENEW" and press the <ENTER> key.
Verify that your IP address is now 192.168.2.xxx (2-255), your
Subnet Mask is 255.255.255.0 and your Default Gateway is
192.168.2.1. These values confirm that your Barricade is
functioning.
4. Type "EXIT" and press <ENTER> to close the "Command
Prompt" window.
To Next Page
Loading...
