C
ONFIGURING
P
RINTER
S
ERVICES
6-7
3. Select the monitored port. The default port name is “SMC100.”
Then click the “Configure Port” button.
4. Enter the IP address of the Barricade and click “OK,” and then
click “Next” in the Add Printer Wizard dialog box.
5. Specify the printer type attached to the Barricade.
6. Continue following the prompts to finish installing the
Barricade print server. The printer type you specified will now
be added to your “Printers” menu.
To Next Page
Loading...
