SMC Networks HRZ001-L - Setting Screen

HRX-OM-I051
Chapter 5 System Operation
5.3 Operation Screen HRZ Series
5-6
5.3.7 Setting screen
Figure 5-9 Setting Screen
This screen enables the setting of TEMP SP value.
Not available if the communication mode is in “SER REMOTE”
*1
.
Table 5-8 Setting Screen
No.
Item
Setting range
1
TEMP SP
HRZ□□□－L□ : -20.0 to 40.0°C
HRZ□□□-L2 : 10.0 to 40.0°C
HRZ□□□-H□ : 20.0 to 90.0°C
HRZ□□□-W□ : -20.0 to 90.0°C
2
FLOW SP
10 to 40LPM(2.6 to 10.6GPM)
FLOW SP is only indicated on HRZ010-W*S and Setting is available.
[Tips]
See “5.3.8 Mode Selection screen” for details on “SER REMOTE” (*1).
1
2