HRX-OM-I051
Chapter 5 System Operation
5.4 Examples of System Operation HRZ Series
4. Use the arrow keys ([▲], [▼], [ ]) to
change the temperature to 34.1°C.
[▲] key: Used to add one value on which the cursor is placed.
[▼] key: Used to subtract one value on which the cursor is
placed.
[ ] key: Used to move the cursor to the right.
Figure 5-20 Setting Screen: Change of Set Value
[Tips]
To cancel a selection, press the [SEL] key, not [ENT] key. With the press of
the [SEL] key, the cancellation takes effect and the screen is switched to the
“Menu screen 1”.
5. Press the [ENT] key with a new set
temperature (34.1°C) entered.
The cursor goes out, and the setting takes effect.
Figure 5-21 Setting Screen: Setting Confirmation
6. Press the [SEL] key to display the “Menu screen 1”.
[Tips]
FLOW SP is only indicated on HRZ010-W*S and setting is available.
To Next Page
Loading...
