4 How to use
-100-
No.PS※※-OMW0009-A
●Product individual parameters (continued)
Setting of OUT1 output mode
0: Normal output
1: Reverse
output
Setting of OUT1 output normal and
reserved output
Setting of OUT1 output set value
Setting of OUT1 hysteresis
Wind mode lower
limit set value
Setting of OUT1 output set value
(lower limit of window comparator)
Wind mode upper
limit set value
Setting of OUT1 output set value
(upper limit of window comparator)
Setting of OUT1 hysteresis
(window comparator hysteresis)
Setting of OUT1 delay time at ON
0.01 s increment (0 to 60 s)
Setting of OUT1 delay time at OFF
0.01 s increment (0 to 60 s)
Setting of OUT2 output mode
0: Normal output
1: Reverse
output
Setting of OUT2 output normal and
reversed output
Setting of OUT2 output set value
Setting of OUT2 hysteresis
Wind mode lower
limit set value
Setting of OUT2 output set value
(lower limit of window comparator)
Wind mode upper
limit set value
Setting of OUT2 output set value
(upper limit of window comparator)
Setting of OUT2 hysteresis
(window comparator hysteresis)
Setting of OUT1 delay time at ON
0.01 s increment (0 to 60 s)
Setting of OUT1 delay time at OFF
0.01 s increment (0 to 60 s)