SMC Networks ISA3 Series User Manual

4 How to use
-75-
No.PS※※-OMW0009-A
●Special function setting
■[F90] Setting of all functions
All functions can be set in turn.
<Operation>
Press the UP or DOWN button in function selection mode to display [F90].
Press the SET button. Move on to setting of all functions.
Setting of all functions
Press the UP or DOWN button to select all functions.
[oFF] (Unused) is
selected
Press the SET button
to set.
Return to function
selection mode.
[on] (Used) is selected
Setting of functions

Return to [oFF] (Unused),
then press the SET button to set.
Return to function selection mode.
[F90] Setting of all functions completed
: Setting of each function
Every time the SET button is pressed, the display moves to the next function in order of "Setting of each function" on page 76.
Set by using the UP and DOWN buttons.
For details of how to set each function, refer to the relevant setting of function section in this manual.
: Measurement mode can be returned from any setting items by pressing and holding the SET button for 2 seconds or longer.
: The function setting from before returning to the measurement mode is maintained.

SMC Networks ISA3 Series Specifications

General

Brand	SMC Networks
Model	ISA3 Series
Category	Switch
Language	English