SMC Networks JXC Series User Manual

0
123.45 mm
100 mm/s
1
12.34 mm
10 mm/s
0
50.00 mm
200 mm/s
1
80.00 mm
100 mm/s
“Easy Mode” for simple setting
Example of checking the operation status
Simple setting allows for immediate use!
Start testing
Move for the
constant rate
Setting of jog
and speed of the
constant rate
Step data
setting
Jogging
<When a PC is used>
Controller setting software
¡ Step data setting, test drive,
jogging, and move for the
constant rate can be set and
operated on one screen.
Step Data Input Type JXC51/61 Series
For immediate use, select “Easy Mode.”
<When a TB (teaching box) is used>
Teaching box screen
¡ The simple screen without scrolling
promotes ease of setting and operation.
¡ Choose an icon from the fi rst screen
to select a function.
¡ Set the step data and
check the monitor on
the second screen.
¡ Data can be set by inputting
only the position and speed.
(Other conditions are preset.)
Example of setting the step data
p. 8
JXC51/61
1
Step Motor Controller JXC Series
1st screen
2nd screen
After entering the values,
they can be registered by pressing “SET.”
Step
Step No.
Posn
Speed
Axis 1
Monitor
Step No.
Posn
Speed
Axis 1
The operation status
can be checked.
1st screen
2nd screen
Step
Step No.
Posn
Speed
Axis 1
Step
Step No.
Posn
Speed
Axis 1

SMC Networks JXC Series Specifications

General

Brand	SMC Networks
Model	JXC Series
Category	Controller
Language	English