SMC Networks SMC8024L2 Management Guide

D IAGNOSING S WITCH I NDICATORS
59
C HANGING A PC’ S IP A DDRESS
To change the IP address of a Windows 2000 PC:
1. Click Start, Settings, then Network and Dial-up Connections.
2. For the IP address you want to change, right-click the network
connection icon, and then click Properties.
3. In the list of components used by this connection on General tab,
select Internet Protocol (TCP/IP), and then click the Properties
button.
4. In the Internet Protocol (TCP/IP) Properties dialog box, click to
select Use the following IP address. Then type your intended IP
address, Subnet mask, and Default gateway in the provided text boxes
5. Click OK to save the changes.
To change the IP address of a Windows XP PC:
1. Click Start, Control Panel, then Network Connections.
2. For the IP address you want to change, right-click the network
connection icon, and then click Properties.
3. In the list of components used by this connection on General tab,
select Internet Protocol (TCP/IP), and then click the Properties
button.
4. In the Internet Protocol (TCP/IP) Properties dialog box, click to
select Use the following IP address. Then type your intended IP
address, Subnet mask, and Default gateway in the provided text boxes
5. Click OK to save the changes.

SMC Networks SMC8024L2 Specifications

General

Brand	SMC Networks
Model	SMC8024L2
Category	Switch
Language	English