EasyManuals Logo
Home>SMC Networks>Vacuum Cleaner>ZK2 Series

SMC Networks ZK2 Series User Manual

Default Icon
71 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #49 background imageLoading...
Page #49 background image
-48-
No. ZK2-OM00201
Ejector Specifications
Model
ZK207
ZK210
ZK212
ZK215
Nozzle diameter
(mm)
0.7
1.0
1.2
1.5
Max.
suction
flow
Note 6)
Port exhaust
(L/min(ANR))
34
56
74
89
Silencer exhaust/Complex exhaust
(L/min(ANR))
29
44
61
67
High-noise reduction silencer exhaust
(L/min(ANR))
34
56
72
83
Air consumption
Note 6)
(L/min(ANR))
24
40
58
90
Max. vacuum pressure
Note 6)
(kPa)
-91
Supply pressure range
Note 7)
(MPa)
0.3 to 0.6 (0.1 to 0.6)
Standard supply pressure
Note 8)
(MPa)
0.35
0.4(0.37)
Note 6) Values at the standard supply pressure. Values are based on standard of SMC measurements. They depend on
atmospheric pressure (weather, altitude, etc.) and measurement method.
Note 7) The value in ( ) is for without valve.
Note 8) The value in ( ) is for without valve. For nozzle size 07 to 12, the value is common to the ejectors with valve and without
valve.
Suction Filter Specifications
Filtration rating
30 μm
Filtration area
510 mm
2
Pressure Sensor specifications
(For details, refer to the PSE series in the Best Pneumatics No. 8 catalog, and the Operation Manual.)
Model (Sensing unit: Standard model
number)
ZK2-PS1-A
(PSE541)
ZK2-PS3-A
(PSE543)
Rated pressure range
0 to -101 kPa
-100 to 100 kPa
Proof pressure
500 kPa
Output voltage
1 to 5 VDC
Output impedance
Approx. 1 kΩ
Power supply voltage
12 to 24 VDC ±10%, Ripple (P-P) 10% or less
Current consumption
15 mA or less
Accuracy
±2% F.S. (Ambient temperature at 25
o
C)
Linearity
±0.4% F.S.
Repeatability
±0.2% F.S.
Effect of power supply voltage
±0.8% F.S.
Environmental
resistance
Ambient temperature
Storage: -20 to 70
o
C (No condensation or freezing)
Ambient humidity
Operation, Storage: 35 to 85% RH (No condensation)
Temperature characteristics
±2% F.S. (Ambient temperature: 25
o
C reference)
Material
Case
Resin case: PBT
Pressure sensing section
Sensor pressure receiving area: Silicone, O-ring: HNBR
Lead wire
Oilproof heavy-duty vinyl cable, 3 wires, Oval 2.7 x 3.2 mm, 3 m
Conductor cross section 0.15 mm
2
, insulator O.D.: 0.9 mm

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SMC Networks ZK2 Series and is the answer not in the manual?

SMC Networks ZK2 Series Specifications

General IconGeneral
BrandSMC Networks
ModelZK2 Series
CategoryVacuum Cleaner
LanguageEnglish

Related product manuals