Smithco 45-204-C - Infield Scarifier (Chisel Blades)

B-29
Center Attachment
45-173 INFIELD SCARIFIER WITH CHISEL BLADES
REF# PART# DESCRIPTION QUANTITY
1 13-114 Digger Blades 9
2 HNTL-38-16 Lock Nut
3
/
8
- 16 9
3 HW-38 Washer
3
/
8
9
4 HB-38-16-125 Bolt
3
/
8
- 16 x 1
1
/
4
9
5 45-116 Center Lift Bar 1
6 HHP-18 Bridge Pin
1
/
8
3
7 HCP-58-250 Clevis Pin
5
/
8
x 2
1
/
2
1
8 HCP-12-200 Clevis Pin
1
/
2
x 2 2
INSTALLATION INSTRUCTIONS
1� Assemble nine digger blades (Ref 1) to the center lift bar (Ref 5) using the
3
/
8
- 16 x 1
1
/
4
bolts, washers
and nuts (Ref 4,5,6)
  
3� Extend hydraulic cylinder all the way down by pushing the lever forward�
4� Mount the rod end of the cylinder onto the center lift bar and secure with a clevis pin (Ref 7) and bridge
pin (Ref 6)�
5� Attach the arms on the center lift bar to the main frame on the machine and secure with clevis pin (Ref
8) and bridge pin (Ref 6)�
6� Turn machine on and test for proper operation�