B-19
Center Attachment
45-012 CONSTRUCTION LEVELING BLADE
REF# PART# DESCRIPTION QUANTITY
1 HHP-18 Bridge Pin,
1
/
8
3
2 HCP-12-200 Clevis Pin,
1
/
2
x 2
2
3 45-116 Center Lift Bar 1
4 HNTL-38-16 Nylon Lock Nut,
3
/
8
- 16 5
5 42-097 Leveling Blade 1
6 HCP-58-250 Clevis Pin,
5
/
8
x 2
1
/
2
1
7 HB-38-16-100 Hex Bolt,
3
/
8
- 16 x 1 5
INSTALLATION INSTRUCTIONS
3
/
8
3
/
8
- 16 lock
nuts (Ref 4) as shown on drawing�
2� Attach the center lift bar to amain frame using clevis pin and bridge pin (Ref 1 and 2)�
3� Lift center lift bar up or extend cylinder so rod end lines up with the holes on the center of the center lift
bar� Use
5
/
8
x 2
1
/
2
clevis pin and bridge pin (Ref 6 & 1) to fasten
cylinder to cultivator�
4� Turn machine on and test for proper operation�
To Next Page
Loading...
