Smiths Medical CADD-Solis User Manual

34
Programming and Operation
NOTE: If the information displayed is incorrect,
selecting the left soft key will back you out of
each screen, allowing you to start over.
5. The pump will take
a moment to set the
program before it asks
you to review the pump
settings. Select Review.
6. Carefully review each patient specific parameter.
If the parameters are not at the desired
values, press S to edit. (See Patient Specific
Parameters on page 29 for more information.)
If the parameters are correct, select Accept Value.
NOTE: When the pump is in the manual mode,
only the factory default settings are considered
to be within the soft limits. If you edit any of the
parameters outside of the factory default, you
are exceeding the soft limit range and you will
be asked to confirm the soft limit override on
each screen (see page 52 for the factory default
settings). The parameter and value will be
displayed in amber.
WARNING:Themanualmodedoesnot
contain programming limits. Be sure to
carefullyrevieweachparametertoensureit
accurately matches the prescription. Failure
tosetthemanualmodetothecorrectvalues
could result in serious patient injury or death.
7. Once you have accepted each of the values,
follow the instructions on the pump to attach
the cassette, prime the set, and start the pump.
NOTE: The manual mode is designed to be used in
unusual circumstances when an order is received
which is different than any of your standard
protocols. Use of the manual mode does not allow
you to use all of the medication safety features built
into the CADD
®
-Solis pump. If you find the manual
mode is being used frequently, consider contacting
your CADD
®
-Solis system administrator to discuss
if additional protocols should be created.
Press here to Review

Smiths Medical CADD-Solis Specifications

General

Brand	Smiths Medical
Model	CADD-Solis
Category	Medical Equipment
Language	English