Smootharc 180 Multiprocess - Error display

44
BOC Smootharc 180 Multiprocess operating manual
Illustration 13. Error Display of Wire Feeder Illustration 14. Error display of over current
Illustration 15. Error display of overheating protection
10.5 Error display
1 Error display of wire feeder
The panel displays as Illustration 13 when the wire feeder is
malfunctioning. The 1 Multifunctional Data Display ashes
continuously when the machine is not working. Restart the machine.
The panel will display the previous parameters before malfunction
occurred.
2 Error display of over-current
The panel displays as Illustration 14 when over-current occurs.
The 1Multifunctional Data Display ashes continuously when the
machine is not working. Restart the machine. The panel will display
the previous parameters before malfunction occurred.
3 Error display of overheating protection
The panel displays as Illustration 15 when overheating. The
1Multifunctional Data Display ashes continuously,when the
machine is not working. Only when the temperature of the welding
machine falls below 60°C will the overheating malfunction would
disappear, and the machine will work normally without restarting.