Smootharc 180 Multiprocess - Technical Specifications

13.0 Technical Specications
Specications 180 Multiprocess
Part No. BOC180MULTI
Input voltage Single phase 240 V ±15 %
Frequency 50/60 Hz
MIG TIG MMA
Maximum rated input current (I
1max
)
31.2 A 24 A 31.1 A
Maximum effective supply current (I
1eff
)
14 A 12 A 13.9 A
No-load voltage 63 V
Output current 32 – 180 A 10 – 180 A 10 – 160 A
Duty cycle 20 % 180 A – 160 A
25 % – 180 A –
Wire feeder Internal or optional spool gun (sold separately)
Internal wire feeder speed 3 to 11 m/min
Post ow time 3 Seconds
Welding wire diameter 0.8/1.0 mm
Remote control No
E󹟾ciency 80 %
Power factor 0.73
Insulation grade H
Housing shielding grade IP21S
EMG grade B
Welding thickness >0.8 mm
Dimensions (L × W × H ) 420 × 220 × 439 mm
Weight 12.8 kg
Standards AS/NZS 60974-1, IEC/EN 60974-10
51BOC Smootharc 180 Multiprocess operating manual