Smootharc 180 Multiprocess - Periodic Maintenance; Power Source

12.0 Periodic Maintenance
WARNING
Only authorised electricians should carry out repairs and internal
servicing.
Modication of the 15A primary input plug or tment of a lower rated
primary input plug will render the warranty null and void.
The working environment or amount of use the machine receives should
be taken into consideration when planning maintenance frequency of
your Smootharc welder.
Preventative maintenance will ensure trouble-free welding and increase
the life of the machine and its consumables.
12.1 Power Source
• Check electrical connections of unit at least twice a year.
• Clean oxidised connections and tighten.
• Inner parts of machine should be cleaned
with a vacuum cleaner and soft brush.
• Do not use any pressure-washing devices.
• Do not use compressed air as pressure may pack dirt even more tightly
into components.
50
BOC Smootharc 180 Multiprocess operating manual