SMORACY BEAST 3680 - Page 58

Copyright 12/14 56 S/N XXXX WO#XXXXXX
Smoracy, LLC
MODEL 3680
CARBIDE INSERT TOOTH
Part Number #900-9902-15 YELLOW
• Good aggressive “IN”
• Good aggressive “OUT”
• Most ideal tool for green material.
• Will not tolerate ungrindable materials larger than nails:
carbide tends to shatter when coming in contact with solid steel
or larger rocks.
• End product tends to look more cut, like saw dust.
• Recommended for larger pieces of wood such as stumps, logs, etc.
• Provides more of a cutting action.
• Carbide teeth of varying hardness offered.
FORGED SPLITTER FAN TOOTH - Part Number #900-9904-62
• Good aggressive “IN”
• Excellent aggressive “OUT”
• Will not tolerate ungrindable materials larger than nails, bolts,
small pieces of thin steel and stones, etc.
• Acts as a splitter that cuts the material entering the grinding
chamber. Often used with shingle or carbide insert tooth.
• Works well on most materials.
• A good all-around tooth.
• Forged fan area increases production of tooth by pushing
material through screen
POINTED SHINGLE FAN TOOTH - Part Number #976-000665
• Usually works with other teeth.
• Used 100% when running shingles.
• Diverse high production.
• Will tolerate light metal and stone.
• Is being used in nearly all applications including demolition,
so long as the larger contaminates have been removed.
• Trimay fan block increases production of tooth by pushing
material through screen.
CUTTERTEETH SECTION
TEETH STYLES