SNAP CIRCUITS BRIC: STRUCTURES - You May Order Additional; Replacement Parts At: Www.elenco.com;Replacement-Parts

SNAP CIRCUITS BRIC: STRUCTURES

60 pages

Save Page as PDF

To Next Page

To Next Page

To Previous Page

To Previous Page

Loading...

7

9

11

8

1o

23

Project 8 BRIC Bridge

2x 2x

2x

4x

4x

LINED LENS,

orient like this

2x

2x

2x

2x

12

4x

4x

2x

Table of Contents

If You Suspect You Have Damaged Parts, You Can Follow this Procedure to Systematically2
Determine Which Ones Need Replacing3
- Parts List3
Lamp (L4), Color LED (D8), Blue LED (D9), Blink Red LED (D11), Color2 LED (D12), Melody4
- How to Use Snap Circuits4
- IC (U32), and Battery Holder (B3): Place Batteries in Holder. Place the Lamp Directly Across the5
Jumper Wires (Blue and Orange): Use this Mini-Circuit to Test each Jumper Wire, the Lamp9
Snap Wires: Use this Mini-Circuit to Test each of the 3-Snap Wires. the Lamp Should Light14
You May Order Additional / Replacement Parts At: Www.elenco.com/Replacement-Parts24