SNAP CIRCUITS BRIC: STRUCTURES - Bric House

SNAP CIRCUITS BRIC: STRUCTURES

60 pages

Save Page as PDF

To Next Page

To Next Page

To Previous Page

To Previous Page

Loading...

13

Project 22 Bric House

4x

5x

6x

49

Table of Contents

If You Suspect You Have Damaged Parts, You Can Follow this Procedure to Systematically2
Determine Which Ones Need Replacing3
- Parts List3
Lamp (L4), Color LED (D8), Blue LED (D9), Blink Red LED (D11), Color2 LED (D12), Melody4
- How to Use Snap Circuits4
- IC (U32), and Battery Holder (B3): Place Batteries in Holder. Place the Lamp Directly Across the5
Jumper Wires (Blue and Orange): Use this Mini-Circuit to Test each Jumper Wire, the Lamp9
Snap Wires: Use this Mini-Circuit to Test each of the 3-Snap Wires. the Lamp Should Light14
You May Order Additional / Replacement Parts At: Www.elenco.com/Replacement-Parts24