37
Administrator / Toolbox Setup
5. Enter a unique name that describes the toolbox,
keeping in mind that if several boxes are online a
user can quickly identify a particular toolbox. For
this exercise we used “Yellow 54””.
6. Enter the Serial Number noted in step 6 under
the “Networking” chapter”. For this exercise we
will enter “Z02JC009”.
7. Depending on the number of toolboxes on line it
will be necessary to select the correct database
to correspond with the correct toolbox. Click on
the “Refresh” button to update the list, click on
the down arrow and choose the correct data-
base. The name of the database will match the
following format: SERIAL_NUMBER\SQLEX-
PRESS. Click on “OK” once the correct selection
is made.
8. Repeat steps 3 through 7 to setup any additional
toolbox. For this manual we have added an addi-
tional box. We have named it “Blue 36”.
To Next Page
Loading...