54
ATC Toolbox Operation
TOOL STATUS
If for some reason a tool has been compromised such as
lost, broken or cannot be returned to the box for other rea-
sons the user can now mark those tools accordingly for its
current status.
To mark a tool double click the tool affected. The screen to
the right appears that allows the user to select the reason
the tool requires attention. Highlight the status of the tool
from the listing, select “Done” when selection is complete.
Once highlighted the tool listing will indicate its current sta-
tus as shown in the screen to the right.
The Administrator will have full view of all tool status as he
synchronizes the box. The Administrator can also change
tool status from his Admin PC.
TOOL PROBLEM NOTIFICATION
For example: If a tool is broken a red indicator will appear
that alerts the users. Click on the message for additional
details of the tool in question.
To Next Page
Loading...