47
Administrator / Toolbox Setup
TOOLS OUT
Select the “Tools Out” tab from the ATC Dashboard screen to view tools that have been removed from the
box. Several lters are available that allow the Administrator to view tools removed by Employee or Location.
By default the “Tools Out” search engine searches for ALL tools out. The Administrator can select one of two
lters that allow him to remove Employees or remove Locations to narrow the search to a certain number of
Employees or one or more locations.
Tool Status can also be altered in this screen by selecting the “Change Tool Status” button. This feature is
also available on the “Tool Search” screen.
To Next Page
Loading...