50
Administrator / Toolbox Setup
FILE BACKUP
It is strongly recommended that the installer or Sys-
tems Administrator perform a le backup as soon as
the ATC Admin software and ATC Boxes are installed
and running. Backing up the operation les from the
ATC boxes will enhance a recovery in the unlikely
event of a PC failure in one of the boxes.
From the main or home menu, select the “Box Setup
& Access” tab.
Highlight the box requiring a le backup.
Next select “Edit Selected Box”. You can only select
one box at a time.
From this screen select “Backup Toolbox Congura-
tion”.
Wait while the box les are written to the Admin
computer.
Select additional boxes to be backed up as required
and repeat the above procedures.
Backups are located at this address:
c:\snap-on\atc\backups
To Next Page
Loading...