39
Administrator / Toolbox Setup
4. Click on “Maintenance” and select “Set Employee
Access Permissions”
5.
Select the <Add new Employee> button.
6. Type in “Master” for the Master Card employee
name.
7. With the administrator card reader plugged into a
USB port of the administrator PC touch the Mas-
ter ID card to it to automatically enter the encod-
ed number. The system will beep and jump back
to the Employee Access Permissions screen.
NOTE: THE MASTER CARD HAS NO PERMIS-
SION AT THIS TIME.
Administrator
Card Reader
To Next Page
Loading...