56
ATC Toolbox Operation
1. Open and login to the Administration software. Click on
“Box Setup & Access”,
2. From the Box Setup & Access screen select the rst
box that you are updating. A small, right-pointing arrow
will appear to the left of the toolbox that is selected.
3. Press the Edit Selected Box button. This will open the
Toolbox Preferences screen.
4. In the Toolbox Preferences screen press the Update
Database Fields button. An “Update in Progress…
Please Wait” message will appear below the button.
5. When the “Update in Progress… Please Wait” mes-
sage disappears click the Done button in the Toolbox
Preferences screen.
6. Repeat steps 7 through 10 for each toolbox that is be-
ing updated.
7. On the Box Setup & Access screen press the Update
ATC Software button.
8. When the le dialog appears navigate to the location of
the toolbox update le (ATC-X.X.X.X.zip).
9. Select the update le and click the Open button.
10. Select Yes to nalize the update le selection when
prompted by the Administration software.
To Next Page
Loading...