53
snom 720 User Manual Using the Phone
Call waiting
When you are in a call, another incoming call will be announced visually by the symbol and
acoustically by the sound of a double beep; you will also see caller ID on-screen if it is being
transmitted. Switch to visual or acoustic announcement only or turn call waiting off in the drop-down
menu on the phone’s web interface, Advanced > Audio > Call Waiting Indication. See also "Call
waiting" on page 72.
Single call waiting More than one call waiting
• Press
to accept the second call and put your current call on hold.
• If you do not wish to accept the call, you can:
◦ ignore the announcement. If you have set call forwarding when busy, the call will be transferred
to that phone.
◦ transfer the call (blind transfer). Press
Xfer
, dial the number, and press .
◦ reject the incoming call by pressing
. The caller hears the busy signal. Pressing for three
seconds will also put the caller on the Deny list of the phone's directory. Future calls from this
number will not ring on the phone; the caller hears the busy signal.
• If there is more than one call waiting, view and select them with
/ . Press to connect to
the on-screen call and put the current call on hold; the other call(s) waiting will remain waiting.
Terminating calls
• When using the handset: Place the handset in the cradle or press .
• When using speakerphone or a headset: Press
.
Missed Calls
Missed calls are indicated by the lit call LED and by the number of missed calls in the status line and/or
on the Status info screen.
• Press
Info
to open the "Status info" screen.
• Press
to turn call LED off.
To Next Page
Loading...
