Snom 720 - Editing Existing Identity (Web Interface)

66
snom 720 User Manual Customizing the Phone Settings
3. Press to open the selected identity.
4. When prompted, enter Account and Registrar.
5. Press
.
On the web interface
Open the Configuration page of the identity and make the changes in the text fields. See "Configuring
new identity/account", section "On the web interface" on page 65 for more information.
If you have changed the account or the registrar, click on "Re-Register" and "Save". If you have made
other changes, clicking on "Apply" and "Save" suffices.
Assigning ringtones to identities
The phone has 10 built-in ringtones that can be assigned to identities, group types, and contact types.
It is also possible to download a custom melody. When an incoming call to an identity is ringing, the
phone will play the ringtone assigned to that identity, unless it is a call from a VIP or a group with a
distinctive ringer of their own.
Assigning ringtones to contact type VIP and group types: See "Directories" on page 36.
Note: Ringers assigned to the contact type VIP and to any of the group types override
the ringers assigned to identities. For example, if you have assigned Ringer 1 to one of
the identities and Ringer 2 to the group "Colleagues", the phone will play Ringer 2 when
a contact from the "Colleagues" group calls that identity.
If your ringtones don’t seem to work as expected, contact your administrator. There may
be an overriding setting on the PBX.
Selecting identity ringtones:
• On the phone: 1 Preferences > 3 Ringer. The identities are shown on the display.
◦ Select an identity with
/ and press to hear the current ringtone for that identity.
◦ Selecting a different ringtone: Press
/ to navigate up and down the list. The marked
ringtone is played. Press to select the currently marked ringtone for the currently selected
identity.
◦ Press
.
• On the web interface (the ringtones will be played by the phone): Configuration Identity (1-12) >
Login.
◦ Click on "Play Ringer" to play the currently selected ringer.
◦ To change the ringer, select a ringer from 1 to 10 in the drop-down menu of "Ringtone". If you
have selected the custom melody, enter the URL to the data file in the text field underneath. It
must be a file of the type PCM 8 kHz 16 bit/sample (linear) mono WAV.
◦ Click on "Apply" and "Save".