67
snom 720 User Manual Customizing the Phone Settings
Date and time formats
The date and time formats can be set and changed on the web interface only.
Date
1. Open Preferences > General Information > US Date Format. The default is "on".
◦ Select "on" to have the date shown on the phone's display in "m/d/yyyy" or "mm/dd/yyyy"
format. Examples: May 6 will be displayed as 5/6; December 10 will be displayed as 12/10.
◦ Select "off" to have the date shown on the phone's display in "d.m.yyyy" or "dd.mm.yyyy"
format.` Examples: May 6 will be displayed as 6.5; December 10 will be displayed as 10.12.
US Date Format setting
Date On Off
March 5, 2012 3/5/2012 5.3.2012
March 12, 2012 3/12/2012 12.3.2012
December 5, 2011 12/5/2011 5.12.2011
December 10, 2011 12/10/2011 10.12.2011
2. Click on "Apply" and "Save".
Time
The time setting affects phones and/or firmware versions with a digital clock only. If the phone has a
clock face, changing the setting will not affect it.
1. Open Preferences > General Information > 24 Hour Clock. The default is "on".
◦ Select "on" to have the time on the phone's display shown in 24-hour format, 00:01 to 24:00 .
◦ Select "off" to have the time on the phone's display shown in AM/PM format, 0:01 AM to 12:00
PM.
2. Click on "Apply" and "Save".
Time zone
The phone receives the time and date from your NTP time server. If the time and/or date on the display
are incorrect, you may need to set the correct time zone. If you have set the correct time zone and the
time is still incorrect, there may be a problem with the time server. Contact your network administrator
or your IP provider.
The list of time zones is arranged by the difference in hours (+/-) to the UTC and, within each time
zone, alphabetically by selected locations (country or country and city). The time zone can be selected
and set on the phone as well as on the web interface.
To Next Page
Loading...
