Snorkel S3370RT - Scissor Stack Assembly SR3370

Scissor stack assembly SR3370
Item Part No Qty Description
1. 12746A 2 Cylinder assembly, SR, lift
2. 9292 4 Pin, 38.1 x 200mm, 10mm keeper
3. 3610-10020 4 Bolt, M6 x 20, C8.8 ZP
4. 11492-3 20 Locktab M10
5. 8626 20 Pin keeper, 10mm, plated
6. 3610-10120 1 Bolt, M10 x 120, C8.8 ZP
7. 3603-10 4 Washer, flat, M10 x 24 ZP
8. 3611-10 1 Nylock nut, M10
9. 11380 1 Safety prop weld
10. 3606-06025 2 Capscrew, countersunk socket, M6 x 25 stainless steel
11. 11143-2 1 Wear pad
12. 3603-06 2 Washer, flat, M6 x 16 ZP
13. 3611-06 2 Nylock nut, M6
14. 3629-5062L 20 Washer, scissor pivot, 51 ID x 65 OD)
15. 11804 10 Scissor pivot pin
16. 3619-5 20 Circlip, external, 50mm nominal diameter
17. 8699 16 Pin, arm/arm
18. 3610-10025 16 Bolt, M10 x 25, G8.8 ZP
19. 12529 5 Arm, outer, mid right hand weld
20. 12588 1 Arm, inner, 2 cylinder weld
21. 12530 4 Arm, outer, mid left hand weld
24. 12934 1 Arm, inner, lower weld
25. 12713 1 Arm, outer, lower right weld
26. 12906 2 Arm, inner weld
27. 12621 1 Arm, inner, top weld
28. 3624-2 60 Bush
29. 3624-3 40 Bush
page 1 - 20 Rev D SR3370 & SR2770 – 13184B
Scissor stack assembly SR3370