Scissor stack assembly SR2770
Item Part No Qty Description
1. 12746A 1 Cylinder assembly, SR lift
2. 9292 2 Pin, 38.1 x 200mm, 10mm keeper
3. 3610-10020 2 Bolt, M10 x 20, C8.8 ZP
4. 11492-3 14 Locktab, M10
5. 8626 14 Pin keeper, 10mm, plated
6. 3610-10120 1 Bolt, M10 x 120, C8.8 ZP
7. 3603-10 4 Washer, flat, M10 x 24 ZP
8. 3611-10 1 Nylock nut, M10
9. 11380 1 Safety prop weld
10. 3606-06025 2 Cap screw, countersunk socket, M6 x 25, stainless steel
11. 11143-2 1 Wear pad
12. 3603-06 2 Washer, flat, M6 x 16 ZP
13. 3611-06 2 Nylock nut, M6
14. 3629-5062L 16 Washer, scissor pivot (Washer 51 ID x 65 OD)
15. 11804 8 Scissor pivot pin
16. 3619-5 16 Circlip, external, 50mm nominal diameter
17. 8699 12 Pin, arm/arm
18. 3610-10025 12 Bolt, M10 x 25, C8.8
19. 12529 3 Arm, outer, mid right hand weld
20. 9332 1 Arm, inner upper weld
21. 12530 3 Arm, outer, mid left hand weld
22. 12906 1 Arm, inner, mid weld
24. 12933 1 Arm, inner, lower weld
25. 12713 1 Arm, outer, lower right weld
26. 9331 1 Arm, inner, upper fourth stage
27. 9502 1 Arm, outer, upper weldment
28. 3624-2 48 Bush
29. 3624-3 32 Bush
SR3370 & SR2770 – 13184B Rev D page 1 - 23
Scissor stack assembly SR2770
To Next Page
Loading...
