Stabiliser assembly
Item Part No Qty Description
Note: All parts are "Per Stabiliser Housing", (4 housings per machine)
1. 3610-10030 2 Bolt, M10 x 30, C8.8
2. 9911 1 Plug, RHS, 100 x 100
3. 3603-06 8 Washer, flat
4. 12036-5 2 Sliding spacer
5. 3604-03016 4 Screw, pan head M3 x 16
6. 11492-4 1 Locktab, dual, 10mm
7. 3610-06110 5 Bolt, M6 x 110, C4.6
8. 12036-7 2 Microswitch
9. 12036-8 1 Microswitch mount plate, dual
10. 3611-03 4 Nut, nylock, M3
11. 3611-06 5 Nut, nylock, M6
12. 7025-015 2 Adpater, JICM straight, 7/16" -> UNO straight, 7/16"
13. 3633-3 2 Roll pin, 1 & 1/4" x 1/4", plated
14. 12036 1 Cylinder
15. 11305 1 Stabiliser foot weldment
16. 11366-1 2 Stabiliser bush
17. 11366-2 1 Plastic tube, 82mm long
18. 11369 1 Pin, 7/8" x 76mm
19. 3602-06 1 Nut, M6, plated
20. 60030-198 1 Washer, fender, 1/4"
21. 11367-2 1 Pilot check valve
22. 12036-6 1 Spring
23. 3626-8 2 Bush
24. 3605-06 1 Washer, spring, M6
25. 7804-002 2 Restrictor, 0.8 x M5
page 1 - 24 Rev D SR3370 & SR2770 – 13184B
Stabiliser assembly
To Next Page
Loading...
