page 2 SR3370 & SR2770 – 13184B
Table of Contents
Section 2. - Hydraulics
Hydraulic assembly .........................2-2
4 wheel drive hydraulic schematic drawing.......2-3
Hose Part Numbers and Colour Codes..........2-5
Hose part numbers and colour codes ...........2-5
Manifold assembly, main .....................2-6
Manifold assembly, main drawing ..............2-7
Manifold assembly, 4 wheel drive ..............2-8
Manifold assembly, stabilisers.................2-9
Hydraulic oil tank assembly..................2-10
Hydraulic oil tank assembly drawing ...........2-11
Steer axle cylinder .........................2-12
Axle cylinder..............................2-13
Main lift cylinder assembly ..................2-14
Section 3. - Electrical
Looms ...................................3-2
Electrical schematic drawing, auto level .........3-3
Colour coded wiring circuit auto level ...........3-4
Electrical schematic drawing, no stabilisers ......3-5
Colour coded wiring circuit, no stabilisers........3-6
Ground control box assembly drawing ..........3-8
Ground control box assembly .................3-9
Ground box ..............................3-10
Ground box drawing - sheet 1 ................3-11
Ground box drawing - sheet 2 ................3-12
Platform control box assembly ...............3-14
Platform Control Box Assembly drawing
Sheet 1 ................................3-15
Platform Control Box Assembly drawing
Sheet 2 ................................3-16
Section 4. - General Options
AC outlet at platform, 230 volt .................4-2
AC outlet at platform 230V drawing.............4-3
Flashing light installation .....................4-4
Fuel gauge option ..........................4-5
4-6
Section 4. - 24Volt DC Option
24Volt DC Option...........................4-7
Colour coded wiring schematic,
24VDC option ............................4-9
Control & hydraulic cabinet assembly - 24VDC ..4-10
Control & hydraulic cabinet assembly
drawing, 24VDC option ...................4-11
Battery box assembly drawing, 24VDC option ...4-12
Battery box assembly - 24VDC option .........4-13
Battery box mounting - 24VDC option..........4-14
Emergency bleed down mounting, 24VDC ......4-15
Relay box assembly, 24VDC option ...........4-16
Relay box assembly drawing, 24VDC option ....4-17
Unloader valve 24VDC option ................4-18