Snorkel UL40 - Specifications

Page 2 - 25UL25/UL32/UL40
SPECIFICATIONS
ITEM UL25 UL32 UL40
Platform capacity 159 kg (350 lbs.) 136 kg (300 lbs.) 136 kg (300 lbs.)
Occupants 1 PERSON 1 PERSON 1 PERSON
Height
Working height 9.62 m (31.6 ft.) 11.75 m (38.5 ft.) 14.19 m (46.6 ft.)
Maximum platform height 7.62 m (25 ft.) 9.75 m (32 ft.) 12.19 m (40 ft.)
Minimum platform height 38 cm (15") 38 cm (15") 38 cm (15")
Dimensions
Overall weight 390 kg (860 lbs) 435 kg (960 lbs) 470 kg (1040 lbs)
DC option weight 29 kg (64 lbs.) 29 kg (64 lbs.) 29 kg (64 lbs.)
Overall width (outriggers extended) 2.06 m (81") 2.06 m (81") 2.95 m (116")
Overall length (outriggers extended) 1.98 m (78") 1.98 m (78") 2.84 m (112")
Stowed dimensions
Vertical height 1.98 m (78") 2.53 m (100") 2.90 m (114")
Width 74 cm (29") 74 cm (29”) 74 cm (29”)
Depth 1.24 m (49") 1.32 m (52") 1.32 m (52")
Diagonal storage height 1.94 m (76") 1.94 m (76") 2 m (79")
Diagonal storage length 2.59 m (102") 2.72 m (107") 3.05 m (120")
System voltage
AC electric motor 120 VAC 60 Hz or 220 VAC 50/60 Hz
DC electric power source 1-12 volt battery, group 27 105 Amp/hrs. minimum weight 22 kg (48 lbs.)
Battery charger Automatic, 120 VAC 60 Hz or 220 VAC 50 Hz
Output: 10 Amp, 12 volts DC
Hydraulic tank capacity 5.7 litres (1.5 gal)
Maximum hydraulic
pressure
165 bar (2400 PSI)
Hydraulic Fluid
Normal temperature: above 0° C
[32 F]
ISO #46
Low temperature: below 0° C [32 F] ISO #32
Extreme temperature: below -17° C
[ 0 F]
ISO #15
Control system Push button lift and lower, red mushroom emergency stop switch
Guardrails 1.1 m (43.5") high
Toeboard 152 mm (6") high
Maximum chassis inclination 1.0 degrees in all directions
Outrigger loading 170 kg (374 lbs.)
Vibration Whole body vibration < 0.5 m/s
2
, Handarm vibration < 2.5 m/s
2
Sound pressure 68 dB (A) at control station
Operating temperature range -20° C to +50° C
Table 3: UL25/32/40 Specication
NOTE: Specications are subject to change without notice. Hot weather or heavy use may affect
performance. Refer to the service manual for complete parts and service information. This ma-
chine meets or exceeds all applicable OSHA and ANSI A92.6 - 1999.