NETYS RT Hot Swap 7 - 11 kVA - 551574B - SOCOMEC
24
EN
No. Item Functions
1
Smart Slot
Connects to options cards. For more infor-
mation, please refer to 5.5 Smart Slot.
2
Dry Contacts
1. Output dry contacts: These receive the
UPS’s event information to indicate the UPS
status or internal messages.
2. Input dry contacts: Lets the UPS receive
external control signals.
3. For more information, please refer to 5.5
Dry Contacts.
3
REPO Port
When emergency events occur, it can shut
down the UPS safely and immediately.
Please refer to 5.4 REPO Port for details.
4
RS-485 Port
Connects to a computer so you can monitor
the UPS status.
5
RS-232 Port
Connects to a computer so you can moni-
tor the state of the UPS, congure the UPS
parameters and upgrade the UPS rmware.
Please refer to 5.5 RS-232 Port and USB for
more information.
The USB port and the RS-232 port must
not be used simultaneously. The USB
port has the higher priority.
6
(USB Port)
Connects to a computer so you can moni-
tor the state of the UPS, congure the UPS
parameters.
Please refer to 5.5 RS-232 Port and USB for
more information.
The USB port and the RS-232 port must
not be used simultaneously. The USB
port has the higher priority.
7
Output Breaker(s)
Prevent(s) the output socket from damage
caused by overload.
8
For UPS internal TMOV grounding.
Do not use for UPS or load grounding
To Next Page
Loading...
