Sofar 1.1KTL2-G3 - Page 10

SOFAR 1~4KTL2-G3 User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd
- 4 -
Must be trained;
Completely read the manual operation and
understand relevant matter.
Warning
Get permission from the local electrical gird operator,
complete all electrical connections by professional
electrical engineer, then connect inverter to electrical
grid.
Attention
It’s forbidden to remove the tamper evident label, or
open the inverter. Otherwise Sofarsolar will not
provide warranty or maintenance!
Note
Operation
Touching the electrical grid or the terminal of the
equipment may lead to electrocution or fire!
Don’t touch the terminal or conductor connected to
the electrical grid.
Pay attention to any instructions or safety documents
related to grid connection.
Danger
Some internal components will be very hot when
inverter is working. Please wear protective gloves!
Keep it away from kids !
Attention
Maintenance and repair
Before any repair work, turn OFF the AC circuit breaker
between the inverter and electrical grid first, then turn
OFF the DC switch.
After turning OFF the AC circuit breaker and DC switch,
wait for 5 minutes at least before carrying out any
maintenance or repair work.
Danger
Inverter should work again after removing any faults. If
you need any repair work, please contact with the local
authorized service center.
Can’t open the internal components of inverter
without authorized. Shenzhen SOFARSOLAR Co., Ltd.
does not take any responsibility for the losses from
Attention