Sofar 1.1KTL2-G3 - Checking before Installation

SOFAR 1~4KTL2-G3 User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd
- 14 -
3.2.Checking Before Installation
Checking Outer Packing Materials
Packing materials and components may be damaged during
transportation. Therefore, check the outer packing materials before
installing the inverter. Check the outer packing materials for
damage, such as holes and cracks. If any damage is found, do not
unpack the SOFAR 1~4KTL2-G3 and contact the dealer as soon as
possible. You are advised to remove the packing materials within
24 hours before installing the SOFAR 1~4KTL2-G3 inverter.
Checking Deliverables
After unpacking the inverter, check whether deliverables are intact
and complete. If any damage is found or any component is missing,
contact the dealer.
Table 3-1 shows the components and mechanical parts that should be
delivered.
NO.
Picture
Description
Quantity
1
1-4KTL2-G3
1pcs
2
Rear panel
1pcs
3
PV+ input terminal
1pcs