SOFAR 1~4KTL2-G3 User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd
Note 1: L3 is the length between the insulation layer of the ground cable
and the crimped part.L4 is the distance between the crimped part and
core wires protruding from the crimped part.
Note 2: The cavity formed after crimping the conductor crimp strip shall
wrap the core wires completely. The core wires shall contact the terminal
closely.
Step 3 Install the crimped OT terminal, flat washer using M5 screw,
and tighten the screw to a torque of 3 N.m using an Allen wrench.
Figure 4-4 Ground terminal composition
1.M5 screw
、
2.OT Terminal
、
3.Tapped hole
4.3.Connecting DC Input Power Cables
Table 4-1 Recommended DC input cable specifications
To Next Page
Loading...
