Sofar 1.1KTL2-G3 - Commissioning of Inverter; Safety Inspection before Commissioning; Start Inverter

SOFAR 1~4KTL2-G3 User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd
- 49 -
5.Commissioning of inverter
5.1.Safety inspection before
commissioning
Ensure that DC and AC voltages are within the
acceptable range of the inverter.
Attention
5.2.Start inverter
Step 1: Turn ON the DC switch. (optional)
Step 2: Turn ON the AC circuit breaker.
When the DC power generated by the solar array is adequate, the
SOFAR 1~4KTL2-G3inverter will start automatically. Screen showing
“normal” indicates correct operation.
NOTE: Choose the correct country code. (refer to section 6.3 of this manual)
Notice: Different distribution network operators in different countries have
different requirements regarding grid connections of PV grid connected
inverters.
Therefore, it's very important to make sure that you have selected
the correct country code according to requirements of local
authority.Please consult qualified electrical engineer or personnel
from electrical safety authorities about this.
Shenzhen SOFARSOLAR Co., Ltd. is not responsible for any
consequences arising out of incorrect country code selection.