SOFAR 1~4KTL2-G3 User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd
3.Installation
Outlines of this chapter
This topic describes how to install the SOFAR 1~4KTL2-G3 .
Installation notes
3.1.Installation Process
Figure 3-1 Installation flowchart
Do NOT install the SOFAR 1~4KTL2-G3 on flammable
material.
Do NOT install the SOFAR 1~4KTL2-G3 in an area used to
store Flammable or explosive material.
The enclosure and heat sink are very hot while the
inverter is working, therefore do NOT install the SOFAR
1~4KTL2-G3 in places where you might touch them
inadvertently.
Consider the weight of SOFAR 1~4KTL2-G3 when
transporting and moving the inverters.
Choose an appropriate mounting position and surface.
Assign at least two persons to install the inverter.
To Next Page
Loading...
