Sofar 1.1KTL2-G3 - Update Software Online

SOFAR 1~4KTL2-G3 User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd
- 61 -
3.Soft Version
10.Safety Paras
4.Hard Version
11.MPPT Scan
5.Country
12.Power Ratio
6.Modbus Address
7.Input Mode
The user enters the main menu by long pressing the button, short
press and turns the page to select menu contents, then long press
the button to enter "3. SystemInfo". Turning the page down can
select the system information to view.
(D) Display Time
Long press the button and short press the button to turn the page
in the standard user interface to enter into “4. Display Time”,then
long press the button to display the current system time.
(E) Software Update
User can update software by USB flash drive, SOFARSOLAR will
provide the new update software called firmware for user if it is
necessary, The user needs to copy the upgrade file to the USB flash
drive.
6.4.Update Software online
SOFAR 1~4KTL2-G3 inverters offer software upgrade via USB flash
drive to maximize inverter performance and avoid inverter
operation error caused by software bugs.
Step 1 First, turn off the DC and AC breaker, and then remove the
communication waterproof cover as the following picture. If the
RS485 line has been connected, Be sure to release the waterproof