SOFAR 1~4KTL2-G3 User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd
20. Set ElecMeter
Enable or disable meter functions.
21. Logic interface
Enable or disable logical interfaces. Please refer to this manual 4.5
RS485, CT, inverter logic interface connection for details.
22. Set Power Ratio
Set generation ratio.
(B) “Event List” Interface as below:
Event List is used to display the real-time event records, including
the total number of events and each specific ID No. and happening
time. User can enter Event List interface through main interface to
check details of real-time event records, Event will be listed by the
happening time, and recent events will be listed in the front. Please
refer to below picture. Long press the button and short press the
button to turn the page in standard interface, then enter into
“2.Event List” interface.
001 ID04 06150825
(Display the event sequence number,
event ID number, and event
occurrence time)
(C) “SystemInfo” Interface as below
------Long press the button
To Next Page
Loading...
