SOFAR 1~4KTL2-G3 User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd
Make sure the grid is disconnected before removing the
AC connector.
4.5.RS485,CT,inverter logic interface
connection
The communication interface location of the SOFAR 1~4KTL2-G3 is
shown in the figure below.
Figure 4-24
Table 4-3 Recommended communication cable size are shown
below, The wiring methods are the same for RS485 and CT, this part
describes their wiring methods and logic interface wiring method.
Step 1 Remove the communication waterproof cover using a
screwdriver;